5G-3.003. Size  


Effective on Sunday, August 17, 1980
  • 1(1) The size of tomatoes packed in any type container, when specified according to the size designations set forth in Table I, shall be within the ranges of diameters specified for the respective designations.

    35TABLE I

     

    37Inches

    38Millimeters

     

     

     

    39Minimum

    40Maximum

    41Minimum

    42Maximum

    43Size Designation

    45Diameter462

    47Diameter483

    49Diameter502

    51Diameter523

    53Extra Small

    551 28/32

    572 4/32

    5948

    6054

    61Small

    622 3/32

    642 9/32

    6653

    6758

    68Medium

    692 7/32

    712 17/32

    7356

    7464

    75Large

    762 15/32

    782 28/32

    8063

    8173

    82Extra Large

    842 26/32

    86

    8771

    88

    892 90Will not pass through a round opening of the designated diameter when tomato is placed with the greatest transverse diameter across the opening.

    1133 114Will pass through a round opening of the designated diameter in any position.

    127(2) In determining compliance with the size designations the measurement for minimum diameter shall be the largest diameter of the tomato measured at right angles to a line from the stem end to the blossom end. The measurement for maximum diameter shall be the smallest dimension of the tomato determined by passing the tomato through a round opening in any position.

    188(3) In lieu of specifying size according to the above size designations, the size of tomatoes in any type container may be specified in terms of minimum diameter or of minimum and maximum diameters expressed in whole inches and not less than thirty-second inch fractions thereof or millimeters, in accordance with the facts. For tolerances see subsection 2455G-3.005(5), 246F.A.C.

    247Rulemaking Authority 570.56 FS., Chapter 80-12, Laws of Florida. Law Implemented 570.56 FS., Chapter 80-12, Laws of Florida. History–New 8-17-80, Formerly 5G-3.03.

     

Related Statutes:

None