 |
Florida Administrative Code (Last Updated: April 18, 2024) |
 |
62. Department of Environmental Protection |
|
D62. Departmental |
|
62-296. Stationary Sources - Emission Standards |
1(1) Applicability. The emission limitations set forth in Rule 1062-296.704, 11F.A.C., shall apply to any facility used to manufacture asphalt concrete by heating and drying aggregate and mixing with asphalt cements, excluding unloading and storage of raw materials.
39(2) Emission Limitations. No owner or operator of an asphalt concrete plant shall cause, permit, or allow the emission of particulate matter in excess of 0.06 gr/dscf, or visible emissions the density of which is greater than 20 percent opacity.
79(3) Test Methods and Procedures. All emissions tests performed pursuant to the requirements of this rule shall comply with the following requirements.
101(a) The test method for visible emissions shall be EPA Method 9, 113as described at 11640 C.F.R. Part 60, 120Appendix A-4, adopted and 124incorporated by reference 127at Rule 12962-204.800, 130F.A.C.
131(b) The test method for particulate matter emissions shall be EPA Method 5 or EPA Method 5A, 148as described at 15140 C.F.R. Part 60, 155Appendix A-3, adopted and 159incorporated by reference 162at Rule 16462-204.800, 165F.A.C. The minimum sample volume shall be 30 dry standard cubic feet.
177(c) Test procedures shall meet all applicable requirements of Chapter 62-297, F.A.C.
189Rulemaking Authority 191403.061 FS. 193Law Implemented 195403.021, 196403.031, 197403.061, 198403.087 FS. 200History–Formerly 17-2.650(2)(c)4., 17-296.704, Amended 11-23-94, 1-1-96, 7-10-14.
