61G1-16.002: Description of Seal
PURPOSE AND EFFECT: The Board proposes the rule amendment in order to provide a description of the seal required.
SUMMARY: The type of seal required will be added to the rule.
SUMMARY OF ESTIMATED REGULATORY COSTS: No Statement of Estimated Regulatory Cost was prepared.
Any person who wishes to provide information regarding a statement of estimated regulatory costs, or provide a proposal for a lower cost regulatory alternative must do so in writing within 21 days of this notice.
SPECIFIC AUTHORITY: 481.221 FS.
LAW IMPLEMENTED: 481.221(2) FS.
IF REQUESTED WITHIN 21 DAYS OF THE DATE OF THIS NOTICE, A HEARING WILL BE SCHEDULED AND ANNOUNCED IN FAW.
THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE IS: Juanita Chastain, Executive Director, Board of Architecture and Interior Design, 1940 North Monroe Street, Tallahassee, Florida 32399-0750.
THE FULL TEXT OF THE PROPOSED RULE IS:
61G1-16.002 Description of Seal.
(1) The seal shall contain the name of only one architect or interior designer and the registration number; the seal of the architect shall be circular, and the seal of the interior designer shall be hexagonal. Both seals shall be an impression-type metal seal, approximately 2" in diameter with two circular lines between which lines shall appear, at the top, the words State of
(2) No change.
Specific Authority 481.221 FS. Law Implemented 481.221(2) FS. HistoryNew 12-23-79, Formerly 21B-16.002, Amended 7-27-89, _______________.