The purpose of the amending of Rule 5F-10.001, F.A.C., is to adopt the most recent version of the chemical and physical standards set forth in ASTM International for antifreeze (engine coolant) products and to alter the language so as to require all ...  


  • RULE NO: RULE TITLE
    5F-10.001: Standards
    PURPOSE AND EFFECT: The purpose of the amending of Rule 5F-10.001, F.A.C., is to adopt the most recent version of the chemical and physical standards set forth in ASTM International for antifreeze (engine coolant) products and to alter the language so as to require all such products to conform to the ASTM International standards adopted in this section. The effect of the adoption of the most recent version of the standards is to maintain up-to-date nationally recognized standards. The purpose of altering the language is to eliminate any possible ambiguity regarding product quality specifications for non-glycol base engine coolants. The effect of these changes will be to ensure that all antifreeze products sold or distributed in the State of Florida meet the ASTM International specifications adopted in this section.
    SUBJECT AREA TO BE ADDRESSED: Proposed Rule 5F-10.001, F..A.C., will specify that the most recent Annual Book of ASTM International Standards is the accepted standard for implementation of Section 501.91, F.S. It will also specify needed rewording of the rule to address possible ambiguity regarding product quality specifications for non-glycol base engine coolants.
    SPECIFIC AUTHORITY: 570.07(23), 501.921 FS.
    LAW IMPLEMENTED: 501.913, 501.917, 501.921 FS.
    IF REQUESTED IN WRITING AND NOT DEEMED UNNECESSARY BY THE AGENCY HEAD, A RULE DEVELOPMENT WORKSHOP WILL BE HELD AT THE DATE, TIME AND PLACE SHOWN BELOW:
    TIME AND DATE: Tuesday, November 28, 2006, 1:00 p.m.
    PLACE: Bureau of Petroleum Inspection’s Conference Room, 3125 Conner Boulevard, Bldg. #1, Tallahassee, Florida 32399-1650
    If a person decides to appeal any decision made by the board, agency, or commission with respect to any matter considered at such meeting or hearing, he or she will need a record of the proceedings, and that, for such purpose, he or she may need to ensure that a verbatim record of the proceedings is made, which record includes the testimony and evidence upon which the appeal is to be based.
    Pursuant to the provisions of the Americans with Disabilities Act, any person requiring special accommodations to participate in this workshop/meeting is asked to advise the agency at least 5 days before the workshop/meeting by contacting: Nancy Fischer, Environmental Manager, Bureau of Petroleum Inspection, 3125 Conner Blvd., Bldg. #1, Tallahassee, FL 32399-1650, Phone: (850)488-9740. If you are hearing or speech impaired, please contact the agency using the Florida Relay Service, 1(800)955-8771 (TDD) or 1(800)955-8770 (Voice).
    THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE DEVELOPMENT AND A COPY OF THE PRELIMINARY DRAFT, IF AVAILABLE, IS: Matthew D. Curran, Ph.D., Chief, Bureau of Petroleum Inspection, 3125 Conner Blvd., Bldg. #1, Tallahassee, FL 32399-1650, phone: (850)488-9740

    THE PRELIMINARY TEXT OF THE PROPOSED RULE DEVELOPMENT IS:

    5F-10.001 Standards.

    (1) The performance specifications and standards for all non-recycled glycol base antifreeze products are hereby incorporated by reference: ASTM D 3306-0503, “Standard Specification for Glycol Base Engine Coolant for Automobile and Light Duty Service,” (approved October 1, 2005).

    (2) The performance specifications and standards for all recycled glycol base antifreeze products are hereby incorporated by reference: ASTM D 6471-0603, “Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light Duty Service,” (approved June 1, 2006) and ASTM D 6472-0603, “Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light Duty Service,” (approved May 1, 2006).

    Specific Authority 570.07(23), 501.921 FS. Law Implemented 501.913, 501.917, 501.921 FS. History–New 10-6-93, Amended 7-5-95, 12-9-98, 6-25-00, 10-22-01, 12-9-02, 12-7-04,_________.

Document Information

Subject:
Proposed Rule 5F-10.001, F..A.C., will specify that the most recent Annual Book of ASTM International Standards is the accepted standard for implementation of Section 501.91, F.S. It will also specify needed rewording of the rule to address possible ambiguity regarding product quality specifications for non-glycol base engine coolants.
Purpose:
The purpose of the amending of Rule 5F-10.001, F.A.C., is to adopt the most recent version of the chemical and physical standards set forth in ASTM International for antifreeze (engine coolant) products and to alter the language so as to require all such products to conform to the ASTM International standards adopted in this section. The effect of the adoption of the most recent version of the standards is to maintain up-to-date nationally recognized standards. The purpose of altering the ...
Rulemaking Authority:
570.07(23), 501.921 FS.
Law:
501.913, 501.917, 501.921 FS.
Contact:
Matthew D. Curran, Ph.D., Chief, Bureau of Petroleum Inspection, 3125 Conner Blvd., Bldg. #1, Tallahassee, FL 32399-1650, phone: (850)488-9740
Related Rules: (1)
5F-10.001. Standards