Purpose and effect is to amplify and clarify the meaning of “degree of control necessary for the Engineer of Record.”  


  • RULE NO: RULE TITLE
    61G15-18.011: Definitions
    PURPOSE AND EFFECT: Purpose and effect is to amplify and clarify the meaning of “degree of control necessary for the Engineer of Record.”
    SUMMARY: The meaning of “degree of control necessary for the Engineer of Record” is amplified and clarified.
    SUMMARY OF STATEMENT OF ESTIMATED REGULATORY COSTS: No Statement of Estimated Regulatory Cost was prepared.
    Any person who wishes to provide information regarding a statement of estimated regulatory costs, or provide a proposal for a lower cost regulatory alternative must do so in writing within 21 days of this notice.
    SPECIFIC AUTHORITY: 471.008, 471.013(1)(a)1., 2. FS.
    LAW IMPLEMENTED: 471.003(2)(f), 471.005(7), 471.005(6), 471.013(1)(a)1., 2., 471.023(1), 471.025(3), 471.033(1)(j) FS.
    IF REQUESTED WITHIN 21 DAYS OF THE DATE OF THIS NOTICE, A HEARING WILL BE SCHEDULED AND ANNOUNCED IN FAW.
    THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE IS: Carrie Flynn, Executive Director, Board of Professional Engineers, 2507 Callaway Road, Suite 200, Tallahassee, Florida 32301

    THE FULL TEXT OF THE PROPOSED RULE IS:

    61G15-18.011 Definitions.

    As used in Chapter 471, F.S., and in these rules where the context will permit the following terms have the following meanings:

    (1) “Responsible Charge” shall mean that degree of control an engineer is required to maintain over engineering decisions made personally or by others over which the engineer exercises supervisory direction and control authority. The engineer in responsible charge is the Engineer of Record as defined in subsection 61G15-30.002(1), F.A.C.

    (a) The degree of control necessary for the Engineer of Record shall be such that the engineer:

    1. through 2. No change.

    3. Approves the inclusion of standard engineering design details into the engineering work. Standard engineering design details include details mandated or directed to be contained in engineering documents by governmental agencies (such as the Florida Department of Transportation); and details contained in engineering design manuals and catalogues that are generally accepted as authoritative in the engineering profession. In order to approve the inclusion of such details the Engineer of Record must conduct such reasonable analysis of the content of the standard detail(s) as is necessary in the sound professional judgment of the Engineer of Record to be assured that the inclusion of such detail(s) into the engineering work is acceptable engineering practice.

    (b) through (d) No change.

    (2) through (6) No change.

    Specific Authority 471.008, 471.013(1)(a)1., 2. FS. Law Implemented 471.003(2)(f), 471.005(7), 471.005(6), 471.013(1)(a)1., 2., 471.023(1), 471.025(3), 471.033(1)(j) FS. History–New 6-23-80, Amended 12-19-82, 11-22-83, Formerly 21H-18.11, Amended 1-16-91, 4-4-93, Formerly 21H-18.011, Amended 12-22-99, 4-19-01, 10-16-02, 9-15-04, 6-5-08,_________.


    NAME OF PERSON ORIGINATING PROPOSED RULE: Board of Professional Engineers
    NAME OF AGENCY HEAD WHO APPROVED THE PROPOSED RULE: Board of Professional Engineers
    DATE PROPOSED RULE APPROVED BY AGENCY HEAD: December 3, 2008
    DATE NOTICE OF PROPOSED RULE DEVELOPMENT PUBLISHED IN FAW: January 30, 2009

Document Information

Comments Open:
2/20/2009
Summary:
The meaning of “degree of control necessary for the Engineer of Record” is amplified and clarified.
Purpose:
Purpose and effect is to amplify and clarify the meaning of “degree of control necessary for the Engineer of Record.”
Rulemaking Authority:
471.008, 471.013(1)(a)1., 2. FS.
Law:
471.003(2)(f), 471.005(7), 471.005(6), 471.013(1)(a)1., 2., 471.023(1), 471.025(3), 471.033(1)(j) FS.
Contact:
Carrie Flynn, Executive Director, Board of Professional Engineers, 2507 Callaway Road, Suite 200, Tallahassee, Florida 32301
Related Rules: (1)
61G15-18.011. Definitions