The purpose of the amendment is to clarify that while formatting of the seal may be altered or changed, the language must be identical to that in the rule.

 

DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION

Board of Professional Engineers

RULE NOS.:RULE TITLES:

61G15-23.004Procedures for Digitally Signing and Sealing Electronically Transmitted Plans, Specifications, Reports or Other Documents

61G15-23.005Procedures for Electronically Signing and Sealing Electronically Transmitted Plans, Specifications, Reports or Other Documents

PURPOSE AND EFFECT: The purpose of the amendment is to clarify that while formatting of the seal may be altered or changed, the language must be identical to that in the rule.

SUMMARY: Formatting of the seal and language.

SUMMARY OF STATEMENT OF ESTIMATED REGULATORY COSTS AND LEGISLATIVE RATIFICATION:

The Agency has determined that this will not have an adverse impact on small business or likely increase directly or indirectly regulatory costs in excess of $200,000 in the aggregate within one year after the implementation of the rule. A SERC has not been prepared by the Agency.

The Agency has determined that the proposed rule is not expected to require legislative ratification based on the statement of estimated regulatory costs or if no SERC is required, the information expressly relied upon and described herein: During discussion of the economic impact of this rule at its Board meeting, the Board, based upon the expertise and experience of its members, determined that a Statement of Estimated Regulatory Costs (SERC) was not necessary and that the rule will not require ratification by the Legislature. No person or interested party submitted additional information regarding the economic impact at that time.

Any person who wishes to provide information regarding a statement of estimated regulatory costs, or provide a proposal for a lower cost regulatory alternative must do so in writing within 21 days of this notice.

RULEMAKING AUTHORITY: 471.025(1), 471.033(2), 471.008 FS.

LAW IMPLEMENTED: 471.025, 471.033(1)(j), 668.003, 668.006 FS.

IF REQUESTED WITHIN 21 DAYS OF THE DATE OF THIS NOTICE, A HEARING WILL BE SCHEDULED AND ANNOUNCED IN THE FAR.

THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE IS: Zana Raybon, Executive Director, Board of Professional Engineers, 2639 North Monroe Street, Suite B-112, Tallahassee, FL 32303; [phone].

 

THE FULL TEXT OF THE PROPOSED RULE IS:

 

61G15-23.004 Procedures for Digitally Signing and Sealing Electronically Transmitted Plans, Specifications, Reports or Other Documents.

(1) through (2) No change.

(3) The affixing of a digital signature to engineering plans, specifications, reports or other documents as provided herein shall constitute the signing and sealing of such items.

(a) through (c) No change.

(d) Formatting of seals and text similar to that depicted below may be used. While the formatting may be altered, the text must remain identical.

1. through 2.  No change.

(e) through (f) No change.

Rulemaking Authority 471.025(1), 471.033(2), 471.008 FS. Law Implemented 471.025, 471.033(1)(j), 668.003, 668.006 FS. History–New 11-3-15, Amended 9-7-17,                                    .

 

61G15-23.005 Procedures for Electronically Signing and Sealing Electronically Transmitted Plans, Specifications, Reports or Other Documents.

(1) through (3) No change.

(4) The affixing of an electronic signature to engineering plans, specifications, reports or other documents as provided herein shall constitute the signing and sealing of such items.

(a) through (c) No change.

(d) Formatting of seals and text similar to that depicted below may be used.  While the formatting may be altered, the text must remain identical.

1. through 2.  No change.

Rulemaking Authority 471.025(1), 471.033(2), 471.008 FS. Law Implemented 471.025, 668.006 FS. History–New 11-3-15, Amended 2-3-16, 10-26-16, 9-7-17,                              .

 

NAME OF PERSON ORIGINATING PROPOSED RULE: Board of Professional Engineers

NAME OF AGENCY HEAD WHO APPROVED THE PROPOSED RULE: Board of Professional Engineers

DATE PROPOSED RULE APPROVED BY AGENCY HEAD: December 7, 2017

DATE NOTICE OF PROPOSED RULE DEVELOPMENT PUBLISHED IN FAR: January 24, 2018