The purpose of these workshops is to review the proposed rule to adjust the slot limit for snook by 1 inch at both ends of the slot to compensate for the new total length measurement method that will take effect July 1, 2006.; 1. 6:00 p.m. - 8:00 p....  

  •  

    FISH AND WILDLIFE CONSERVATION COMMISSION
    Marine Fisheries

    The Fish and Wildlife Conservation Commission announces a series of workshops concerning a proposed change in the snook slot size limit, to which all interested persons are invited:

    DATE AND TIME:

    1. 6:00 p.m. - 8:00 p.m., May 10, 2006, Broward County Library, 100 South Andrews Ave., Ft. Lauderdale, FL.
    2. 6:00 p.m. - 8:00 p.m., May 11, 2006, Old County Courthouse, Administrative Conference Room, 1st Floor,
    2115 Second St., Ft. Myers, FL.
    3. 6:00 p.m. - 8:00 p.m., May 15, 2006, Fish and Wildlife Conservation Commission, Florida Fish and Wildlife
    Research Institute, 100 8th Ave. SE, St. Petersburg, FL.
    GENERAL SUBJECT MATTER TO BE CONSIDERED: The purpose of these workshops is to review the proposed rule to adjust the slot limit for snook by 1 inch at both ends of the slot to compensate for the new total length measurement method that will take effect July 1, 2006.
    Pursuant to the provisions of the Americans with Disabilities Act, any person requiring special accommodations to participate in this workshop/meeting is asked to advise the agency at least 5 days before the workshop/meeting by contacting: the ADA Coordinator, at (850)488-6411. If you are hearing or speech impaired, please contact the agency by calling (850)488-9542. If you are hearing or speech impaired, please contact the agency using the Florida Relay Service, 1(800)955-8771 (TDD) or 1(800)955-8770 (Voice).
    For more information, you may contact: Mark Robson, at 2590 Executive Center Circle East, Suite 201, Tallahassee, Florida 32301, (850) 487-0554.

     

Document Information

Hearing Meeting:
Subject:
The purpose of these workshops is to review the proposed rule to adjust the slot limit for snook by 1 inch at both ends of the slot to compensate for the new total length measurement method that will take effect July 1, 2006.
Meeting:
public meeting