The proposed rule amendments update the applicability requirements of Rule 62-296.513, F.A.C., Surface Coating of Miscellaneous Metal Parts and Products. The revision provides alternatives to the Miscellaneous Metal Parts ....

 

DEPARTMENT OF ENVIRONMENTAL PROTECTION

RULE NO.:RULE TITLE:

62-296.513Surface Coating of Miscellaneous Metal Parts and Products

PURPOSE, EFFECT AND SUMMARY: The proposed rule amendments update the applicability requirements of Rule 62-296.513, F.A.C., Surface Coating of Miscellaneous Metal Parts and Products. The revision provides alternatives to the Miscellaneous Metal Parts and Products (MMPP) requirements for aerospace parts and products coating operations by cross-referencing the requirements of the federal National Emission Standards for Hazardous Air Pollutants (NESHAP), 40 CFR Part 63, Subpart GG, adopted by reference in Rule 62-204.800, F.A.C.

RULEMAKING AUTHORITY: 403.061, 403.8055, F.S.

LAW IMPLEMENTED: 403.021, 403.031, 403.061, 403.087, 403.8055, F.S.

THIS RULEMAKING IS UNDERTAKEN PURSUANT TO SECTION 403.8055, F.S. WRITTEN COMMENTS MAY BE SUBMITTED WITHIN 21 DAYS OF THE DATE OF THIS NOTICE TO: Hastings Read, Division of Air Resource Management, 2600 Blair Stone Road, MS 5500, Tallahassee, Florida 32399-2400, or [e-mail].

SUBSTANTIALLY AFFECTED PERSONS MAY WITHIN 14 DAYS OF THE DATE OF THIS NOTICE, FILE AN OBJECTION TO THIS RULEMAKING WITH THE ENVIRONMENTAL REGULATION COMMISSION, ADMINISTRATIVE ASSISTANT, DEP, MS 35, 3900 COMMONWEALTH BOULEVARD, TALLAHASSEE, FLORIDA 32399-3000. THE OBJECTION SHALL SPECIFY THE PORTIONS OF THE PROPOSED RULE TO WHICH THE PERSON OBJECTS AND THE SPECIFIC REASONS FOR THE OBJECTION.

 

THE FULL TEXT OF THE PROPOSED RULE IS:

 

62-296.513 Surface Coating of Miscellaneous Metal Parts and Products.

(1) Applicability.

(a) No change.

(b) The provisions of Rule 62-296.513, F.A.C., shall not apply to the surface coating of the following metal parts and products:

1. through 8. No change.

9. Customized top coating of automobiles and trucks if production is less than 35 vehicles per day; and,

10. Exterior of marine vessels; and,.

11. Aerospace parts and products coating operations that are either:

a. Facilities classified as area sources that comply with primer, topcoat, and specialty coating VOC control requirements of 40 CFR Part 63, Subpart GG, as adopted and incorporated by reference in Rule 62-204.800, F.A.C.; or

b. Facilities classified as major sources that are subject to 40 CFR Part 63, Subpart GG, as adopted and incorporated by reference in Rule 62-204.800, F.A.C.

(c) No change.

(2) through (4) No change.

Rulemaking Authority 403.061,403.8055 FS. Law Implemented 403.021, 403.031, 403.061, 403.087, 403.8055 FS. History–Formerly 17-2.650(1)(f)14., 17-296.513, Amended 11-23-94, 1-1-96, 7-10-14, -------.