To remedy a potential conflict within the rule and the referenced adopted boiler code by removing language related to the pressure gage dial range referencing the maximum allowable working pressure, and to harmonize language between the rule and ...

DEPARTMENT OF FINANCIAL SERVICES
Division of State Fire Marshal

RULE NO: RULE TITLE
69A-51.060: Requirements for New Installations
PURPOSE AND EFFECT: To remedy a potential conflict within the rule and the referenced adopted boiler code by removing language related to the pressure gage dial range referencing the maximum allowable working pressure, and to harmonize language between the rule and adopted boiler code by changing the term “Steam gauge” to “Pressure gage” within the rule.
SUBJECT AREA TO BE ADDRESSED: Installation of Pressure Gages on Power Boilers.
SPECIFIC AUTHORITY: 554.103 FS.
LAW IMPLEMENTED: 554.103, 554.104, 554.105, 554.106, 554.107 FS.
IF REQUESTED IN WRITING AND NOT DEEMED UNNECESSARY BY THE AGENCY HEAD, A RULE DEVELOPMENT WORKSHOP WILL BE HELD AT THE DATE, TIME AND PLACE SHOWN BELOW:
TIME AND DATE: Thursday, June 17, 2010, 10:00 a.m.
PLACE: Third Floor Conference Room, The Atrium, 325 John Knox Road, Tallahassee, Florida
Pursuant to the provisions of the Americans with Disabilities Act, any person requiring special accommodations to participate in this workshop/meeting is asked to advise the agency at least 5 days before the workshop/meeting by contacting: Mike Burns, Boiler Chief, [phone], [e-mail]. If you are hearing or speech impaired, please contact the agency using the Florida Relay Service, 1(800)955-8771 (TDD) or 1(800)955-8770 (Voice).
THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE DEVELOPMENT AND A COPY OF THE PRELIMINARY DRAFT, IF AVAILABLE, IS: AVAILABLE AT NO CHARGE FROM THE CONTACT PERSON LISTED ABOVE, and on the Department’s website at http://www.myfloridacfo.com/SFM/sfmnotice.htm