This rule development will update and condense Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., into a single rule chapter, creating Chapter 5J-22, F.A.C. The intent is to repeal Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 ...  

  •  

    DEPARTMENT OF AGRICULTURE AND CONSUMER SERVICES

    Division of Consumer Services

    RULE NOS.:RULE TITLES:

    5J-22.001Definitions

    5J-22.002Specifications, Tolerances and Other Technical Requirements for Weighing and Measuring Devices

    5J-22.003Uniform Packaging and Labeling Regulation; Uniform Regulation for National Type Evaluation; Uniform Regulation for the Voluntary Registration of Servicepersons and Service Agencies for Commercial Weighing and Measuring Devices; Uniform Regulation for the Method of Sale of Commodities; Examination Procedure for Price Verification; and Uniform Unit Pricing Regulation

    5J-22.004Net Contents of Packaged Goods

    5J-22.005Metrology Lab Fees

    5J-22.006Weighing and Measuring Device Permits

    5J-22.007Guidelines for Imposing Administrative Penalties

    PURPOSE AND EFFECT: This rule development will update and condense Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., into a single rule chapter, creating Chapter 5J-22, F.A.C. The intent is to repeal Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., after the adoption of Chapter 5J-22, F.A.C. This rule development will also update the adopted versions of the National Institute of Standards and Technology (NIST) Handbooks 44, 130 and 133; clarify that weighing and measuring devices used in commerce in this state must have a certificate of conformance from the National Type Evaluation Program (NTEP) under the National Conference on Weights and Measures (NCWM); update ASTM International document versions adopted in this rule; update the permitting section to reflect new devices now being used in the marketplace; update the penalty sections; update department form references and update optional metrology lab fees.

    SUBJECT AREA TO BE ADDRESSED: The rule development includes updating and condensing Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., into a single rule chapter, creating Chapter 5J-22, F.A.C. The intent is to repeal Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., after the adoption of Chapter 5J-22, F.A.C. This rule development also includes updating the adopted versions of the National Institute of Standards and Technology (NIST) Handbooks 44, 130 and 133; clarifying that weighing and measuring devices used in commerce in this state must have a certificate of conformance from the National Type Evaluation Program (NTEP) under the National Conference on Weights and Measures (NCWM); updating ASTM International document versions adopted in this rule; updating the permitting section to reflect new devices now being used in the marketplace; updating the penalty sections; updating department form references and updating optional metrology lab fees.

    RULEMAKING AUTHORITY: 531.40, 531.41(3), 531.44(2), 531.45, 531.66, 570.07(23) FS.

    LAW IMPLEMENTED: 531.40, 531.41(3), (4), (7), (13), 531.415, 531.42, 531.44, 531.45, 531.47, 531.49, 531.50, 531.60-66 FS.

    A RULE DEVELOPMENT WORKSHOP WILL BE HELD AT THE DATE, TIME AND PLACE SHOWN BELOW:

    DATE AND TIME: Thursday, June 11, 2015, 8:30 a.m. – 12:00 p.m.

    PLACE: 3125 Conner Blvd., Eyster Auditorium, Tallahassee, FL 32399

    Pursuant to the provisions of the Americans with Disabilities Act, any person requiring special accommodations to participate in this workshop/meeting is asked to advise the agency at least 3 days before the workshop/meeting by contacting: Matthew D. Curran, Ph.D., Chief, Bureau of Standards at (850)921-1570. If you are hearing or speech impaired, please contact the agency using the Florida Relay Service, 1(800)955-8771 (TDD) or 1(800)955-8770 (Voice).

    THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE DEVELOPMENT AND A COPY OF THE PRELIMINARY DRAFT, IF AVAILABLE, IS: Matthew D. Curran, Ph.D., Chief, Bureau of Standards, 3125 Conner Blvd., Bldg. #2, Tallahassee, FL 32399, (850)921-1570

    THE PRELIMINARY TEXT OF THE PROPOSED RULE DEVELOPMENT IS AVAILABLE AT NO CHARGE FROM THE CONTACT PERSON LISTED ABOVE.

Document Information

Subject:
The rule development includes updating and condensing Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., into a single rule chapter, creating Chapter 5J-22, F.A.C. The intent is to repeal Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., after the adoption of Chapter 5J-22, F.A.C. This rule development also includes updating the adopted versions of the National Institute of Standards and Technology (NIST) Handbooks 44, 130 and 133; clarifying that weighing ...
Purpose:
This rule development will update and condense Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., into a single rule chapter, creating Chapter 5J-22, F.A.C. The intent is to repeal Rule Chapters 5F-1, 5F-3, 5F-4, 5F-5, 5F-7, 5F-12 and 5F-13, F.A.C., after the adoption of Chapter 5J-22, F.A.C. This rule development will also update the adopted versions of the National Institute of Standards and Technology (NIST) Handbooks 44, 130 and 133; clarify that weighing and measuring ...
Rulemaking Authority:
531.40, 531.41(3), 531.44(2), 531.45, 531.66, 570.07(23), FS.
Law:
531.40, 531.41(3), (4), (7), (13), 531.415, 531.42, 531.44, 531.45, 531.47, 531.49, 531.50, 531.60-66, FS.
Contact:
Matthew D. Curran, Ph.D., Chief, Bureau of Standards, 3125 Conner Blvd., Bldg. #2, Tallahassee, FL 32399 (850) 921-1570.
Related Rules: (7)
5J-22.001. Definitions
5J-22.002. Specifications, Tolerances and Other Technical Requirements for Weighing and Measuring Devices
5J-22.003. Uniform Regulations and Methods of Sale
5J-22.004. Net Contents of Packaged Goods
5J-22.005. Metrology Lab Fees
More ...