RULE NO: RULE TITLE
9B-1.006: Certification of Agencies
9B-1.010: Manufacturer's Quality Control Manual Procedures
9B-1.016: Department Insignia
9B-1.017: Insignia Application and Issuance
PURPOSE AND EFFECT: Clarification of requirements that manufacturers and agencies develop written procedures for the receipt, storage and release of insignias and submittal of completed inspection documentation on the Building Code Information System; and means of delivery of insignias to the agency.
SUBJECT AREA TO BE ADDRESSED: Manufactured buildings inspections and insignias.
SPECIFIC AUTHORITY: 553.37(2), 553.381 FS.
LAW IMPLEMENTED: 553.37(2), (6), (8), 553.38, 553.381 FS.
A RULE DEVELOPMENT WORKSHOP WILL BE HELD AT THE DATE, TIME AND PLACE SHOWN BELOW:
DATE AND TIME: July 8, 2010, 10:00 a.m.
PLACE: Department of Community Affairs, Randall Kelley Training Room, Third Floor, 2555 Shumard Oak Boulevard, Tallahassee, Florida 32399-2100; Participation by communications media technology available as follows: Conference call, telephone number 1(888)808-6959, Conference Code: 1967168
Pursuant to the provisions of the Americans with Disabilities Act, any person requiring special accommodations to participate in this workshop/meeting is asked to advise the agency at least 7 days before the workshop/meeting by contacting: Ila Jones, Community Program Administrator, Department of Community Affairs, 2555 Shumard Oak Boulevard, Tallahassee, Florida 32399-2100; (850)487-1824. If you are hearing or speech impaired, please contact the agency using the Florida Relay Service, 1(800)955-8771 (TDD) or 1(800)955-8770 (Voice).
THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE DEVELOPMENT AND A COPY OF THE PRELIMINARY DRAFT, IF AVAILABLE, IS: Ila Jones, Community Program Administrator, Department of Community Affairs, 2555 Shumard Oak Boulevard, Tallahassee, Florida 32399-2100; (850)487-1824
Draft text is available from Ila Jones or from the Building Code Information System, www.floridabuilding.org.
THE PRELIMINARY TEXT OF THE PROPOSED RULE DEVELOPMENT IS AVAILABLE AT NO CHARGE FROM THE CONTACT PERSON LISTED ABOVE.
Clarification of requirements that manufacturers and agencies develop written procedures for the receipt, storage and release of insignias and submittal of completed inspection documentation on the Building Code Information System; and means of ...
Document Information
- Subject:
- Manufactured buildings inspections and insignias.
- Purpose:
- Clarification of requirements that manufacturers and agencies develop written procedures for the receipt, storage and release of insignias and submittal of completed inspection documentation on the Building Code Information System; and means of delivery of insignias to the agency.
- Rulemaking Authority:
- 553.37(2), 553.381 FS.
- Law:
- 553.37(2), (6), (8), 553.38, 553.381 FS.
- Contact:
- Ila Jones, Community Program Administrator, Department of Community Affairs, 2555 Shumard Oak Boulevard, Tallahassee, Florida 32399-2100; (850)487-1824 Draft text is available from Ila Jones or from the Building Code Information System, www.floridabuilding.org.
- Related Rules: (4)
- 9B-1.006. Certification of Third Party Agencies
- 9B-1.010. Manufacturer's Quality Assurance Manual Control Procedures
- 9B-1.016. Department Insignia
- 9B-1.017. Insignia Application and Issuance
- Subject: