Adoption of Model Rules of Procedure

DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION
Board of Professional Engineers

RULE NO.: RULE TITLE:
61G15-18.008: Adoption of Model Rules of Procedure

NOTICE OF CORRECTION

Notice is hereby given that the following correction has been made to the proposed rule in Vol. 37 No. 43, October 28, 2011 issue of the Florida Administrative Weekly.

The correction is in response to comments submitted by the Joint Administrative Procedures Committee in a letter dated November 10, 2011. The corrections are as follows:

The PURPOSE AND EFFECT shall read as:

The Board proposes the rule repeal as the rule is no longer necessary as it is a substantial restatement of statute and duplicative of rule.

The STATEMENT OF ESTIMATED REGULATORY COSTS shall read as: During discussion of the economic impact of this rule at its Board meeting, the Board, based upon the expertise and experience of its members, determined that a Statement of Estimated Regulatory Cost (SERC) was not necessary and that these rule amendments will not require ratification by the Legislature. No person or interested party submitted additional information regarding the economic impact at that time. The Board has determined that this will not have an adverse impact on small business, or likely increase regulatory costs in excess of $200,000 in the aggregate within 1 year after implementation of the rule.

Any person who wishes to provide information regarding the statement of estimated costs, or to provide a proposal for a lower regulatory cost alternative must do so in writing within 21 days of this notice.

THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE IS: Zana Raybon, Executive Director, Board of Professional Engineers, 2507 Callaway Road, Suite 200, Tallahassee, Florida 32399-5267