The purpose of the amendment is to update Chapter 61G15 regarding the deletion of Certificates of Authorization and replacement with engineering business organizations.

 

DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION

Board of Professional Engineers

RULE NO.:RULE TITLE:

61G15-30.001Purpose

PURPOSE AND EFFECT: The purpose of the amendment is to update Chapter 61G15 regarding the deletion of Certificates of Authorization and replacement with engineering business organizations.

SUMMARY: Update rule text.

SUMMARY OF STATEMENT OF ESTIMATED REGULATORY COSTS AND LEGISLATIVE RATIFICATION:

The Agency has determined that this will not have an adverse impact on small business or likely increase directly or indirectly regulatory costs in excess of $200,000 in the aggregate within one year after the implementation of the rule. A SERC has not been prepared by the Agency.

The Agency has determined that the proposed rule is not expected to require legislative ratification based on the statement of estimated regulatory costs or if no SERC is required, the information expressly relied upon and described herein: During discussion of the economic impact of this rule at its Board meeting, the Board, based upon the expertise and experience of its members, determined that a Statement of Estimated Regulatory Costs (SERC) was not necessary and that the rule will not require ratification by the Legislature. No person or interested party submitted additional information regarding the economic impact at that time.

Any person who wishes to provide information regarding a statement of estimated regulatory costs, or provide a proposal for a lower cost regulatory alternative must do so in writing within 21 days of this notice.

RULEMAKING AUTHORITY: 471.008. 471.033(2) FS.

LAW IMPLEMENTED: 471.015(7), 471.033 FS.

IF REQUESTED WITHIN 21 DAYS OF THE DATE OF THIS NOTICE, A HEARING WILL BE SCHEDULED AND ANNOUNCED IN THE FAR.

THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE IS: Zana Raybon, Executive Director, Board of Professional Engineers, 2639 North Monroe Street, Suite B-112, Tallahassee, FL 32303; 850-521-0500.

 

THE FULL TEXT OF THE PROPOSED RULE IS:

 

61G15-30.001 Purpose.

(1) The Board has adopted these responsibility rules pursuant to Section 471.033(2), F.S., to safeguard the life, health, property and welfare of the public by promoting proper conduct in the practice of engineering and due care and regard for acceptable engineering principles and standards. The Board considers that professional engineers may avoid disciplinary actions by observing the procedures set forth herein. Failure to comply with these rules may be considered as noncompliance with subsection 61G15-19.001(4), F.A.C., unless the deviation or departure therefrom is justified by the specific circumstances of the project in question. Furthermore, these rules are intended to apply as general guidelines where no contractual relationship exists between the parties addressed herein. These rules are not intended to take precedence over contractual relationships developed between the parties addressed herein, so long as those contractual relationships do not violate Chapter 471, F.S., or the stated purpose of these responsibility rules. These responsibility rules shall apply to every person holding a license certificate of registration as a professional engineer, every certified engineer intern, and every qualified engineering business organization, holder of a certificate of authorization, as appropriate. A professional engineer’s practices, education, training, experience, qualifications, technical competence, conduct, and responsibilities in connection with his authorized engineering practice, services, and creative work are subject to regulation solely by the Board of professional engineers, the courts, and local jurisdictions.

(2) No later than December 31, 2024, the Board shall review and consider amendment, modification, or repeal of this rule if review determines this rule creates barriers to entry for private business competition, is duplicative, outdated, obsolete, overly burdensome, or imposes excessive costs.

Rulemaking Specific Authority 471.033(2), 471.008 FS. Law Implemented 471.033(1) FS. History–New 1-26-93, Formerly 21H-30.001, Amended 11-13-08,                     .

 

NAME OF PERSON ORIGINATING PROPOSED RULE: Board of Professional Engineers

NAME OF AGENCY HEAD WHO APPROVED THE PROPOSED RULE: Board of Professional Engineers

DATE PROPOSED RULE APPROVED BY AGENCY HEAD: December 12, 2019

DATE NOTICE OF PROPOSED RULE DEVELOPMENT PUBLISHED IN FAR: February 13, 2020