The Board proposes the rule amendment due to a recent legislative change.

 

DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION

Electrical Contractors' Licensing Board

RULE NO.:RULE TITLE:

61G6-7.001Specialty Electrical Contractors

PURPOSE AND EFFECT: The Board proposes the rule amendment due to a recent legislative change.

SUMMARY: Due to a recent statutory change made by the Legislature, the rule is being amended.

SUMMARY OF STATEMENT OF ESTIMATED REGULATORY COSTS AND LEGISLATIVE RATIFICATION:

The Agency has determined that this will not have an adverse impact on small business or likely increase directly or indirectly regulatory costs in excess of $200,000 in the aggregate within one year after the implementation of the rule. A SERC has not been prepared by the Agency.

The Agency has determined that the proposed rule is not expected to require legislative ratification based on the statement of estimated regulatory costs or if no SERC is required, the information expressly relied upon and described herein: During discussion of the economic impact of this rule at its Board meeting, the Board, based upon the expertise and experience of its members, determined that a Statement of Estimated Regulatory Costs (SERC) was not necessary and that the rule will not require ratification by the Legislature. No person or interested party submitted additional information regarding the economic impact at that time.

Any person who wishes to provide information regarding a statement of estimated regulatory costs, or provide a proposal for a lower cost regulatory alternative must do so in writing within 21 days of this notice.

RULEMAKING AUTHORITY: 489.511(4) FS.

LAW IMPLEMENTED: 489.505(19), 489.511(4) FS.

IF REQUESTED WITHIN 21 DAYS OF THE DATE OF THIS NOTICE, A HEARING WILL BE SCHEDULED AND ANNOUNCED IN THE FAR.

THE PERSON TO BE CONTACTED REGARDING THE PROPOSED RULE IS: Ruthanne Christie, Executive Director, Electrical Contractors’ Licensing Board, 2601 Blair Stone Road, Tallahassee, FL 32399-0751.

 

THE FULL TEXT OF THE PROPOSED RULE IS:

 

61G6-7.001 Specialty Electrical Contractors.

The following types of specialty electrical contractors may apply to be certified under the provisions of Chapter 489, Part II, F.S., and Chapter 61G6-5, F.A.C., above. In order to be admitted to a specialty contractor examination, the person must show 6 years of comprehensive training, technical education, or broad experience on the type of electrical or alarm system work for which certification is desired.

(1) No change.

(2) Sign Specialty Electrical Contractor. The scope of certification includes the structural fabrication including concrete foundation, erection, installation, alteration, repair, service and wiring of electrical signs, non-electrical signs and outline lighting. The scope of certification shall not include the provision of, or any electrical work beyond, the last disconnect mean or terminal points. However, a contractor certified under this section may provide the electrical entrance requirements for metering and main disconnect of remote billboards or signs which are independent of any structure or building and which require no more than twenty-five (25) kilowatts at two hundred fifty (250) volts maximum.

(3) through (6) No change.

Rulemaking Authority 489.511(4) FS. Law Implemented 489.505(19), 489.511(4) FS. History–New 1-2-80, Amended 7-29-84, 10-14-84, Formerly 21GG-7.01, Amended 2-23-86, 12-24-87, 6-21-89, 3-3-92, Formerly 21GG-7.001, Amended 1-28-96, 12-25-96, 6-11-97, 12-24-97, 7-19-98, 10-7-99, 2-17-00, 4-30-01, 4-30-03, 9-16-07, 12-2-08, 8-22-11, 8-1-19, 7-8-20,                          .

 

NAME OF PERSON ORIGINATING PROPOSED RULE: Electrical Contractors’ Licensing Board

NAME OF AGENCY HEAD WHO APPROVED THE PROPOSED RULE: Electrical Contractors’ Licensing Board

DATE PROPOSED RULE APPROVED BY AGENCY HEAD: June 11, 2024

DATE NOTICE OF PROPOSED RULE DEVELOPMENT PUBLISHED IN FAR: July 11, 2024