Equivalence of Standards  

  •  

    DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION

    Florida Building Commission

    RULE NO.:RULE TITLE:

    61G20-3.015Equivalence of Standards

    NOTICE OF CHANGE

    Notice is hereby given that the following changes have been made to the proposed rule in accordance with subparagraph 120.54(3)(d)1., F.S., published in Vol. 40, No. 37, February 24, 2014 issue of the Florida Administrative Register.

     

    61G20-3.015 Equivalence of Standards.

    (1) through (3) No change.

    (4) Standards which meet or exceed standards referenced by 2010 edition of the Code and recognized as equivalent for determining Code Compliance are:

    (a) through (b) No change.

    (c) ANSI/DASMA 108-2012 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference equivalent to ANSI/DASMA 108-2005 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference, incorporated and adopted herein.

    (d) FRSA/TRI April 2012 (04-12) Florida High Wind Concrete and Clay Roof Tile Installation Manual, Fifth Edition Revised, equivalent to FRSA/TRI 07320/8 – 05 Concrete and Clay Roof Tile Installation Manual, Fourth Edition, incorporated and adopted herein.

    (e) The material incorporated and adopted in paragraphs (4)(a) through (4)(d) is copyrighted material that is available for public inspection and examination at the Department of State, Administrative Code and Register Section, Room 701, The Capitol, Tallahassee, Florida 32399-0250, and at the Office of Codes and Standards, 1940 North Monroe Street, Room 90, Tallahassee, Florida 32399-0772.

    (5) through (7) No change.

    Rulemaking Authority 553.842(1), (16) FS. Law Implemented 553.842 FS. History–New 5-5-02, Amended 3-9-04, 11-22-06, 5-13-09, Formerly 9B-72.180, 9N-3.015, Amended 4-2-13,__________.

Document Information

Related Rules: (1)
61G20-3.015. Equivalence of Standards