Florida Administrative Code (Last Updated: October 28, 2024) |
5. Department of Agriculture and Consumer Services |
5J. Division of Consumer Services |
5J-21. Motor Fuel Specifications And Standards |
5J-21.007. Adoption of the General Code and the Codes of Liquid-Measuring Devices, Liquefied Petroleum Gas and Anhydrous Ammonia Liquid-Measuring Devices, Hydrocarbon Gas Vapor-Measuring Devices, Vehicle-Tank Meters, ....
1(1) The general code and the codes of liquid-measuring devices, liquefied petroleum gas and anhydrous ammonia liquid-measuring devices, hydrocarbon gas vapor-measuring devices, vehicle-tank meters, and vehicle tanks used as measures relating to specifications, tolerances, and other technical requirements for commercial weighing and measuring devices, contained in National Institute of Standards and Technology Handbook 44, 55are adopted and incorporated by reference in Rule 5J-22.002, F.A.C.
65(2) All operating petroleum fuel measuring devices must be sealed with an appropriate security seal in such a manner that the metering adjustment cannot be changed without breaking the seal. An appropriate security seal is one which has been applied by the Department or a person who is registered with the Department as a meter mechanic and bears at least the name or initials of the registered meter mechanic.
134(3) 135Any registered person, agency, or device owner that has installed or returned to service a petroleum fuel measuring device must report the existence or repair of the petroleum device to the department at (850)921-1545 or by fax at (850)921-1548, within twenty-four (24) hours after installation, but no sooner than 10 days prior to installation using FDACS-03017, Placed in Service Report, Rev. 05/17, 197as incorporated by reference in Rule 5J-22.003, F.A.C. 205Petroleum measuring devices placed into service or returned to service by unregistered persons and not in accordance with any exceptions provided by rule shall not be used in commerce.
234(4) Each dispensing device from which diesel fuel is sold at retail shall be equipped with a nozzle spout that conforms to SAE International J285, APRIL2019, “Dispenser Nozzle Spouts for Liquid Fuels Intended for Use with Spark Ignition and Compression Ignition Engines,” and is hereby incorporated by reference. Copies of this publication may be obtained at http://standards.sae.org. This code is also available for public inspection during regular business hours at the Florida Administrative Code and Register, R.A. Gray Building, 500 South Bronough Street, Tallahassee, FL 32399-0250, and the Florida Department of Agriculture and Consumer Services, Division of Consumer Services, Bureau of Standards, 3125 Conner Boulevard, Tallahassee, FL 32399-1650. Posting of this material on the internet for purposes of public examination would violate federal copyright law.
360(5) 361All retail motor fuel dispensers in operation at self-service facilities shall comply with the provisions of Section 378526.141(5)(b), F.S.
380(a) As used in Section 385526.141(5)(b), F.S., 387the term “pump” means the face of a motor fuel dispenser or a stand-alone unit as described in paragraph (b) of this subsection.
410(b) The term “affixed,” as used in Section 419526.141(5)(b), F.S., 421means:
4221. Directly attached to the pump on the upper fifty percent of the front panel in a position clear and conspicuous from the driver’s position; or
4482. Directly attached to a stand-alone unit located no more than 36'' from either side of the motor fuel dispenser, at a height equivalent to the upper fifty percent of the motor fuel dispenser’s front panel, and in a position clear and conspicuous from the driver’s position. If a stand-alone unit is used, it must contain controls to communicate directly with the self-service facility’s staff.
513Rulemaking Authority 515525.14, 516526.09, 517526.141(5)(b), 518531.40, 519531.41(3), 520570.07(23) FS. 522Law Implemented 524525.07, 525526.141(5)(b), 526531.40 FS. 528History–New 1-1-74, Amended 7-1-74, Repromulgated 12-31-74, Amended 4-18-75, 1-25-76, 1-17-77, 2-15-79, 6-4-80, 4-5-81, 5-2-82, 6-30-83, 7-15-84, 8-11-85, Formerly 5F-2.14, Amended 7-7-86, 4-5-87, 4-27-88, 5-31-89, 8-21-90, 8-5-91, 12-10-92, 11-29-94, 11-13-97, 12-9-98, 8-3-99, 7-31-00, 9-3-01, 8-15-02, 6-29-03, 6-21-04, 6-1-06, 5-6-08, 1-3-10, 1-7-15, Formerly 5695F-2.014, 570Amended 11-10-15, 11-15-20.