 |
Florida Administrative Code (Last Updated: November 11, 2024) |
 |
5. Department of Agriculture and Consumer Services |
|
5F. Division of Standards |
|
5F-8. Permitting And Inspection Requirements For Amusement Devices And Amusement Attractions |
1The following standards, materials and practices are hereby adopted and incorporated by reference and are available for public inspection during regular business hours at the Florida Department of Agriculture and Consumer Services, Division of Standards, 3125 Conner Boulevard, Suite N, Tallahassee, Florida 32399-1650.
44(1) ASTM International Committee F-24 on Amusement Rides and Devices Designation.
55(a) F 747-06 “Standard Terminology Relating to Amusement Rides and Devices.”
66(b) F 770-06a “Standard Practice for Ownership and Operation of Amusement Rides and Devices.”
80(c) F 846-92 (reapproved 2003) “Standard Guide for Testing Performance of Amusement Rides and Devices.”
95(d) F 853-05 “Standard Practice for Maintenance Procedures for Amusement Rides and Devices.”
108(e) F 893-05a “Standard Guide for Inspection of Amusement Rides and Devices.”
120(f) F 1159-03a “Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures.”
150(g) F 1193-06 “Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices.”
165(h) F 1305-94 (2002) “Standard Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses.”
182(i) F 1957-99 185(2004) “Standard Test Method for Composite Foam Hardness-Durometer Hardness.”
194(j) F 2007-07a “Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities.”
209(k) F 2137-04 (2009) “Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices.”
225(l) F 2291-09a “Standard Practice for Design of Amusement Rides and Devices.”
237(m) F 2374-07a “Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices.”
252(n) F 2375-09 (2009) “Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh Used in Amusement Rides, Devices, Play Areas, and Attractions.”
278(o) F 2376-08 “Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems.”
294(p) F 2460-07 “Standard Practice for Special Requirements for Bumper Boats.”
305(q) F 2461-09 (2009) “Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment.”
321The above referenced F-24 Committee standards are compiled by ASTM International in the 2009 Annual Book of ASTM Standards, Volume 34115.07. 342A copy of this publication or the individual standards can be obtained by contacting ASTM International, 100 Barr Harbor Drive, P. O. Box C700, West Conshohocken, Pennsylvania 19428-2959; Phone (610)832-9500; www.astm.org.
373(2) National Electrical Code (NEC) Handbook, Article 525, “Carnivals, Circuses, Fairs, and Similar Events,” 2008 Edition. A copy of this publication can be obtained by contacting the National Fire Protection Association at 1 Batterymarch Park, Quincy, Massachusetts 02169-7471; Phone 1(800)344-3555; www.nfpa.org.
415(3) National Fire Protection Association (NFPA), Document 101, “Life Safety Code”, 2009 Edition, Chapters 3.3.32.10, 12.4.7, and 13.4.7, each entitled “Special Amusement Buildings.” The chapters listed in this section succeeded Chapters 8-4.6 and 9-4.6 of the “Life Safety Code.” A copy of this publication can be obtained by contacting the National Fire Protection Association at 1 Batterymarch Park, Quincy, Massachusetts 02169-7471; Phone 1(800)344-3555; www.nfpa.org.
479(4) ASTM International Designation E 543-08a, “Standard Specification for Agencies Performing Nondestructive Testing.” A copy of this publication can be obtained by contacting ASTM International, 100 Barr Harbor Drive, P. O. Box C700, West Conshohocken, Pennsylvania 19428-2959; Phone (610)832-9500; www.astm.org.
519(5) American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, “Personnel Qualification and Certification in Nondestructive Testing,” 2006 Edition. A copy of this publication can be obtained by contacting the American Society For Nondestructive Testing, 1711 Arlingate Lane, Post Office Box 28518, Columbus, Ohio 43228-0518; phone 1(800)222-2768; www.asnt.org.
569Rulemaking 570Authority 571616.165, 572616.242(4) FS. 574Law Implemented 576616.242577(4) 578FS. History–New 2-14-99, 581Amended 10-2-07, 5835-30-10.
